ip dhcp-relay (for loopback)

Configure Dynamic Host Configuration Protocol (DHCP) Relay on an interface. The command no ip dhcp-relay disables DHCP Relay but does not delete the DHCP entry.

Syntax

default ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}
default ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode
ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}
ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} disable
ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} enable
ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode { bootp | bootp_dhcp | dhcp }
no ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}
no ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} enable

Command Parameters

{A.B.C.D} {A.B.C.D}: The first IP address is the IP address of the dhcp-relay agent, while the second one is the IP address of the server.
<bootp|dhcp|bootp_dhcp>: Configures DHCP mode to forward BootP messages only, DHCP messages only, or both. The default is both.

Default

None

Command Mode

Loopback Interface Configuration

9037600-00 Rev AA