show isis int-timers

Display Intermediate-System-to-Intermediate-System (IS-IS) interface timers.

Syntax

show isis int-timers
show isis int-timers [home|remote]

Command Parameters

home: Displays the IS-IS interface timer information that the system configures in the home area.
remote: Displays the IS-IS interface timer information that the system configures in the remote area.

Default

None

Command Mode

User EXEC

Command Output

The show isis int-timers command displays the following information:


Parameter	Description
IFIDX	Indicates the interface index for the Ethernet or MLT interface.
LEVEL	Indicates the IS-IS interface level.
HELLO INTERVAL	Indicates the interval at which a Hello packet is sent to the IS-IS network.
HELLO MULTIPLIER	Indicates the multiplier that is used in conjunction with the Hello Interval.
HELLO DR	Indicates the interval at which a Hello packet is sent to the IS-IS network if the router is a designated router (DIS).
AREA	Indicates the type of area as home or remote.
AREA-NAME	Indicates the name of the area.

Example

Switch:1# show isis int-timers home
================================================================================
                             ISIS Interface Timers
================================================================================
IFIDX        LEVEL      HELLO         HELLO         HELLO   AREA   AREA-NAME       
                        INTERVAL      MULTIPLIER    DR             
--------------------------------------------------------------------------------
Mlt2         Level 1        9          3             3     HOME    area-9.00.02
Port1/21     Level 1        9          3             3     HOME    area-9.00.02