show endpoint-tracking

Display the global status of Endpoint Tracking on the switch, and the configured I-SID offset value, if applicable.

Syntax

Default

None

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.

Command Output

The show endpoint-tracking command displays the following information:

Output field

Description

endpoint tracking status

Specifies whether Endpoint Tracking is globally enabled or disabled on the switch.

auto-isid-offset value

Specifies the configured I-SID offset value used to calculate an I-SID value for a switched UNI when no I-SID value is provided by the RADIUS server.

auto-isid-offset enabled

Specifies whether the I-SID offset value is globally enabled or disabled on the switch.

visibility-mode status

Specifies whether visibility mode is globally enabled or disabled on the switch.

Example

The following example displays a switch with Endpoint Tracking globally enabled, and an I-SID offset value configured and enabled.

Switch:1>show endpoint-tracking
=======================================================================================
                          Endpoint Tracking Configuration
=======================================================================================

                            endpoint tracking status : ENABLED
                              auto-isid-offset value : 15990000
                            auto-isid-offset enabled : ENABLED
                              visibility-mode status : ENABLED