show auto-sense

Displays the Auto-sense configuration on the switch.

Syntax

Command Parameters

access-differv
Displays the Auto-sense configuration related to Differentiated Services (DiffServ).
data
Displays the Auto-sense configuration related to the data I-SID.
dhcp-detection
Displays the Auto-sense configuration related to DHCP server auto-detection.
eapol
Displays the Auto-sense configuration related to Link Layer Discovery Protocol (LLDP) authentication for Extensible Authentication Protocol over LAN (EAPoL or EAP).
fa
Displays the Auto-sense configuration related to Fabric Attach (FA) message authentication and FA client-specific configuration.
isis
Displays the Auto-sense configuration related to Intermediate-System-to-Intermediate-System (IS-IS) authentication and information related to the L1 metric, such as a legend.
onboarding
Displays the Auto-sense configuration related to the onboarding I-SID.
qos
Displays the Auto-sense configuration related to overriding 802.1p bits.
voice
Displays the Auto-sense configuration related to voice for IP phones.
wait-interval
Displays the Auto-sense configuration related to the time to wait for an LLDP neighbor to be detected in the Auto-sense wait state before transitioning to the Auto-sense onboarding state.

Default

None.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.