show isis area-vnode

Displays the IS-IS SPBM area virtual node information.

Syntax

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.

Command Output

The show isis area-vnode command displays the following information:

Parameter

Description

REPRESENTED-AREA

Indicates the type of area that the area virtual node represents.

SYSTEM-ID

Indicates the adjacent system ID of the router.

NICK-NAME

Indicates the nickname of the area virtual node.

HOST-NAME

Indicates the hostname listed in the LSP. If the host name is not configured, then the system name is displayed.

AREA

Indicates the type of area as home or remote.

Example

Displaying the IS-IS SPBM area virtual node information on the switch:

Switch:1>show isis area-vnode
=================================================================================================
                                    ISIS SPBM Multi-Area VNode Info
=================================================================================================
VNODE             VNODE         VNODE                            REPRESENTED    REPRESENTED VNODE
SYSTEM-ID         NICK-NAME     HOST-NAME       AREA-ADDRESS     AREA           USED-IN-AREA
-------------------------------------------------------------------------------------------------
9200.30ff.fff0    9.00.30       area-9.00.30    49.0030          HOME           REMOTE
9200.50ff.fff0    9.00.50       area-9.00.50    49.0050          REMOTE         HOME