show lldp tx-tlv

Display Link Layer Discovery Protocol (LLDP) transmission TLVs.

Syntax

Default

None

Command Mode

Privileged EXEC

Command Output

The show lldp tx-tlv command displays the following information:

Output field

Description

Port

Specifies the port number.

PortDesc

Specifies the port description transmission TLV.

The default is enabled.

SysName

Specifies the system capabilities transmission TLV.

The default is enabled.

SysDesc

Specifies the system description transmission TLV.

The default is enabled.

SysCap

Specifies the system name transmission TLV.

The default is enabled.

Switch:1(config-if)#show lldp tx-tlv
=======================================================
                     LLDP port tlvs
=======================================================
-------------------------------------------------------
Port       PortDesc   SysName   SysDesc   SysCap    LocalMgmtAddr
-------------------------------------------------------
1/1        enabled    enabled   enabled   enabled    enabled
1/2        enabled    enabled   enabled   enabled    enabled
1/3/1      enabled    enabled   enabled   enabled    enabled
1/3/2      enabled    enabled   enabled   enabled    enabled
1/3/3      enabled    enabled   enabled   enabled    enabled
1/3/4      enabled    enabled   enabled   enabled    enabled
1/4        enabled    enabled   enabled   enabled    enabled
1/5        enabled    enabled   enabled   enabled    enabled
1/6        enabled    enabled   enabled   enabled    enabled
1/7        enabled    enabled   enabled   enabled    enabled
1/8        enabled    enabled   enabled   enabled    enabled
1/9        enabled    enabled   enabled   enabled    enabled
1/10       enabled    enabled   enabled   enabled    enabled