mac-security limit-learning

Syntax

• default mac-security limit-learning [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] enable

• default mac-security limit-learning [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] max-addrs

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning enable

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} max-addrs

• mac-security limit-learning enable

• mac-security limit-learning [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] max-addrs <max-addrs>

• no mac-security limit-learning

• no mac-security limit-learning enable

• no mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning

• no mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning enable

Command Parameters

enable

Limits the MAC learning for the port.

limit-learning max-addrs <max-addrs>

Specifies the maximum number of MAC addresses to learn. The default is 1024.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.