ip dhcp-relay fwd-path (for a VRF)

Syntax

• default ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}

• default ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} disable

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} enable

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode bootp

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode bootp_dhcp

• ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D} mode dhcp

• no ip dhcp-relay fwd-path {A.B.C.D} {A.B.C.D}

Command Parameters

{A.B.C.D}

Creates a forwarding path to the Dynamic Host Configuration Protocol (DHCP) server. A.B.C.D is the IP address of the server. The default IP address of the relay is the address of the interface.

Tip

If the relay is a virtual router configured on this interface, you must set the vrid.

disable

Disables the forwarding path.

enable

Enables the forwarding path.

mode <bootp|dhcp|bootp_dhcp>

Configures DHCP mode to forward BootP messages only, Dynamic Host Configuration Protocol (DHCP) messages only, or both. The default is both.

Default

None

Command Mode

VRF Router Configuration