untagged-traffic (for a port)

Syntax

• no untagged-traffic port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [bpdu enable]

• untagged-traffic port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} [bpdu enable]

Command Parameters

bpdu

Set bpdu forwarding.

enable

Enable bpdu forwarding.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Elan I-SID Configuration