isis redistribute direct

Syntax

• default isis redistribute direct enable

• default isis redistribute direct metric

• default isis redistribute direct metric-type

• default isis redistribute direct route-map

• default isis redistribute direct subnets

• isis redistribute direct

• isis redistribute direct enable

• isis redistribute direct metric <0-65535>

• isis redistribute direct metric-type external

• isis redistribute direct metric-type internal

• isis redistribute direct route-map WORD<0-64>

• isis redistribute direct subnets allow

• isis redistribute direct subnets suppress

• no isis redistribute direct

• no isis redistribute direct enable

• no isis redistribute direct metric

• no isis redistribute direct metric-type

• no isis redistribute direct route-map

• no isis redistribute direct subnets

Command Parameters

enable

Enables route redistribution.

metric <0-65535>

Configures the metric (cost) to apply to redistributed routes. The default is 1.

metric-type external

Configures the type of route to import into the protocol. The default is internal.

metric-type internal

Configures the type of route to import into the protocol. The default is internal.

route-map WORD<0-64>

Configures the route policy to apply to redistributed routes. Specifies a name.

subnets allow

Indicates whether the subnets are advertised individually or aggregated to their classful subnet. Choose allow to advertise the subnets individually with the learned or configured mask of the subnet. The default is allow.

subnets suppress

Indicates whether the subnets are advertised individually or aggregated to their classful subnet. Choose suppress to advertise subnets aggregated to their classful subnet. The default is allow.

Default

By default, redistribution is disabled.

Command Mode

VRF Router Configuration

Usage Guidelines

If you use this command, configured secondary IP subnets are always redistributed unless you configure a filtering route-map with redistribution.