show lldp tx-tlv port

Display Link Layer Discovery Protocol (LLDP) transmission TLVs for transmission on a specific port.

Syntax

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

Command Output

The show lldp tx-tlv port command displays the following information:

Output field

Description

Port

Specifies the port number.

PortDesc

Specifies the port description transmission TLV.

SysName

Specifies the system capabilities transmission TLV.

SysDesc

Specifies the system description transmission TLV.

SysCap

Specifies the system name transmission TLV.

Switch:1(config-if)#show lldp tx-tlv port 1/2
=======================================================
                     LLDP port tlvs
=======================================================
-------------------------------------------------------
Port       PortDesc   SysName   SysDesc   SysCap    LocalMgmtAddr
-------------------------------------------------------
1/2        enabled    enabled   enabled   enabled   enabled