show lldp tx-tlv med

Display Link Layer Discovery Protocol (LLDP) Media Endpoint Device (MED) TLV interface information.

Syntax

show lldp tx-tlv med

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

Command Output

The show lldp tx-tlv med command displays the following information:


Output field	Description
Port	Specifies the port number.
MedCapabilities	Specifies the system name MED transmission TLV.
NetworkPolicy	Specifies the network policy MED transmission TLV.
Location	Specifies the system description MED transmission TLV.
ExtendedPowerViaMDI	Specifies the extended power-via-MDI Media Endpoint Device (MED) transmission TLV. This TLV is applilcable for POE-capable switches only.
Inventory	Specifies the system capabilities MED transmission TLV.

Example

Switch:1#show lldp tx-tlv med

========================================================================== 
                               LLDP port med tlvs
========================================================================== 
-------------------------------------------------------------------------- 
Port          Med        Network   Location  ExtendedPower Inventory
           Capabilities   Policy                ViaMDI
--------------------------------------------------------------------------
1/1        enabled       enabled   enabled   enabled       enabled
1/2        enabled       enabled   enabled   enabled       enabled