tacacs server host

Configures the entry for the primary TACACS+ server.

Syntax

default tacacs server {A.B.C.D}
default tacacs server {A.B.C.D} port
default tacacs server {A.B.C.D} single-connection
default tacacs server {A.B.C.D} single-connection source source-ip-interface enable
default tacacs server {A.B.C.D} source source-ip-interface enable
default tacacs server {A.B.C.D} timeout
default tacacs server host {A.B.C.D} source {A.B.C.D}
no tacacs server {A.B.C.D}
no tacacs server {A.B.C.D} single-connection
no tacacs server {A.B.C.D} source source-ip-interface enable
tacacs server host {A.B.C.D}
tacacs server host {A.B.C.D} key WORD<0-128>
tacacs server host {A.B.C.D} port <1-65535>
tacacs server host {A.B.C.D} port <1-65535> source {A.B.C.D} source-ip-interface enable
tacacs server host {A.B.C.D} single-connection
tacacs server host {A.B.C.D} source {A.B.C.D}
tacacs server host {A.B.C.D} source {A.B.C.D} source-ip-interface enable
tacacs server host {A.B.C.D} timeout <10-30>

{A.B.C.D}: Specifies the IP address of the primary TACACS+ server.
Key WORD<0-128>: Configures the secret key to share with this TACACS+ server. If the key length is zero, that indicates no encryption is used.
port <1-65535>: Configures the TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. The default is 49.
single-connection: Specifies if the TCP connection between the device and the TACACS+ server is a single connection. If you do not enable the single-connection parameter, the system uses the default connection type that opens and closes a connection for each communication session.
source {A.B.C.D}: Configures the IP address of the interface to use with this server. If you do not configure an address, the system uses 0.0.0.0 as the default.
source-ip-interface enable: Enables the source address. You must enable this parameter if you configure a valid source IP address. The default is disabled.
timeout <10-30>: Configures the maximum time, in seconds, to wait for this TACACS+ server to reply. The default is 10 seconds.

None

Global Configuration

The source {A.B.C.D} and source-ip-interface enable parameters are only supported on VSP 8600 Series.