boot config logfile

Configure logfile parameters.

  • The log file is named using an 8.3 (xxxxxxxx.sss) format.

  • The first six characters of the file name contain the last three bytes of the chassis base MAC address.

  • The next two characters specify the slot number of the CP that generated the logs.

  • The last three characters denote the sequence number of the log file.

Multiple sequence numbers are generated for the same chassis and same slot, if the maximum log file size is reached.

Syntax

Command Parameters

<10-90>
Specifies the maximum percentage, from 10-90%, of space on the external storage device the log file can use. The switch does not support this parameter.
<500-16384>
Specifies the maximum size of the log file from 500-16384 KB.
<64-500>
Specifies the minimum free memory space on the external storage device from 64-500 KB. The switch does not support this parameter.

Default

None

Command Mode

Global Configuration

9037600-00 Rev AA