show ipv6 mroute interface

Displays the IPv6 mroute interface information

Syntax

show ipv6 mroute interface
show ipv6 mroute interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If your platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 mroute interface command displays the following information:


Output field	Description
INTERFACE	Displays the slot and port number or VLAN ID for this entry.
TTL	Displays the datagram time-to-live (TTL) threshold for the interface. IPv6 multicast datagrams with a TTL less than this threshold are not forwarded out of the interface. The default value of 0 means that all multicast packets are forwarded out of the interface.
PROTOCOL	Displays the protocol as one of the following: other(1): none of the following local(2): manually configured netmgmt(3): configured by a network management protocol pimSparseMode(8): PIM-SMv2 igmpOnly(10) pimSsmMode(11) spb

Example

The following example displays the IPv6 mroute interface information.

Switch:1>show ipv6 mroute interface

============================================================
                        Mroute Interface - GlobalRouter

============================================================
INTERFACE   TTL       PROTOCOL
------------------------------------------------------------
VLAN 2      1         pimsm   
VLAN 7      1         pimsm   
VLAN 10     1         pimsm   
VLAN 20     1         pimsm   

4 out of 4 total mroute entries displayed