clear eapol non-eap
Clears the Non-EAP session that is learned on the switch.
Syntax
-
clear eapol
non-eap
-
clear eapol non-eap {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
-
clear eapol non-eap {slot/port[/sub-port][-slot/port[/sub-port]][,...]} 0x00:0x00:0x00:0x00:0x00:0x00
-
clear eapol non-eap
0x00:0x00:0x00:0x00:0x00:0x00
Command Parameters
- {slot/port[/sub-port] [-slot/port[/sub-port]]
[,...]}
- Specifies the port list on which
the Non-EAP MAC is learnt.
-
Identifies the
slot and port in one of the following formats: a single slot and
port (slot/port), a range of slots and ports
(slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If the platform supports
channelization and the port is channelized, you must also
specify the sub-port in the format slot/port/sub-port.
- 0x00:0x00:0x00:0x00:0x00:0x00
- Specifies the MAC-Address on the
Non-EAP session.
Command Mode
Privileged EXEC
