show vlan mac-address-entry

View forwarding database (FDB) filters to display the FDB filters for the specified VLAN.

Syntax

Command Parameters

<1-4059>
Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
mac 0x00:0x00:0x00:0x00:0x00:0x00
Specifies the MAC address.
port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If your platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
spbm-tunnel-as-mac
Discovers where entries are learned. The TUNNEL column indicates where in the SPBM network an entry is learned.

Default

None

Command Mode

User EXEC

Command Output

The show vlan mac-address-entry command displays the following information:

Output field

Description

VLAN ID

Indicates the VLAN for this MAC address.

STATUS

Indicates the status of this entry:

  • other

  • invalid

  • learned

  • self

  • mgmt

MAC ADDRESS

Indicates the MAC address.

INTERFACE

Displays the network-to-network interface (NNI).

SMLT REMOTE

Indicates the MAC address entry for the remote vIST peer.

TUNNEL

Indicates the host name of the remote Backbone Edge Bridge (BEB).