To display OSPF Area Information for a specified VRF, enter the following command at any level of the CLI.
device# show ip ospf vrf green area
Indx Area Type Cost SPFR ABR ASBR LSA Chksum(Hex)
1 0 normal 0 6 0 0 6 00039ba2
2 1 normal 0 6 0 2 6 0003af4b
Syntax: show ip ospf vrf vrf-name area [ area-id ] | [ ip-address ]
The vrf-name parameter specifies the VRF that the user wants to the OSPF area information for.
The area-id parameter shows information for the specified area.
The ip-address parameter displays the entry that corresponds to the IP address the user enters.