Configuring transit session accounting

Configures the transit session accounting between labels, and well as LDP and RSVP.

To configure transit session accounting, complete the following steps.

1. Configure the device.
   

   device# configure

2. Enable the MPLS router.
   

   device(config)# router mpls

3. Enter the policy mode.
   

   device(config-router-mpls)# policy

4. Configures the transit session accounting.
   

   device(config-router-mpls-policy)# transit-session-accounting

Example

The following example configures the transit session accounting.

device# configure
device(config)# router mpls
device(config-router-mpls)# policy
device(config-router-mpls-policy)# transit-session-accounting