Displaying VPNv4/VPNv6 route details

Here is an example of the information displayed when the user uses the detail option. In this example, the information for one route is shown.

      device# show ip bgp vpnv4 routes detail
Total number of BGP Routes: 288
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED
Route Distinguisher: 4:1
1     Prefix: 10.6.1.0/24,  Status: I,  Age: 15h36m10s
      NEXT_HOP: 10.2.2.2,  Learned from Peer: 10.2.2.2 (1)
      Out-Label: 500000
        LOCAL_PREF: 100,  MED: 3,  ORIGIN: incomplete,  Weight: 0
        AS_PATH:
        Extended Community: RT 300:1 OSPF DOMAIN ID:0.0.0.0 OSPF RT 0:1:0 OSPF ROUTER ID:0.0.0.0

Table 1. BGP VPNv4 route information
This field...	Displays...
Prefix	The network address and prefix.
Age	The last time an update occurred.
Learned from Peer	The IP address of the neighbor that sent this route.
Local_Pref	The degree of preference for this route relative to other routes in the local AS. When the BGP4 algorithm compares routes on the basis of local preferences, the route with the higher local preference is chosen. The preference can have a value from 0 - 4294967295.
MED	The route‘s metric. When the route does not have a metric, this field is blank.
Origin	The source of the route information. The origin can be one of the following: EGP - The routes with this set of attributes came to BGP through EGP. IGP - The routes with this set of attributes came to BGP through IGP. INCOMPLETE - The routes came from an origin other than one of the above. For example, they may have been redistributed from OSPF or RIP. When BGP4 compares multiple routes to a destination to select the best route, IGP is preferred over EGP and both are preferred over INCOMPLETE.
Atomic	Whether network information in this route has been aggregated and this aggregation has resulted in information loss. Note: Information loss under these circumstances is a normal part of BGP4 and does not indicate an error.
Aggregation ID	The router that originated this aggregator.
Aggregation AS	The AS in which the network information was aggregated. This value applies only to aggregated routes and is otherwise 0.
Originator	The originator of the route in a route reflector environment.
Cluster List	The route-reflector clusters through which this route has passed.
Learned From	The IP address of the neighbor from which the Extreme device learned the route.
Admin Distance	The administrative distance of the route.
Adj_RIB_out	The number of neighbors to which the route has been or is advertised. This is the number of times the route has been selected as the best route and placed in the Adj-RIB-Out (outbound queue) for a BGP4 neighbor.
Communities	The communities the route is in.
Extended Community	The device‘s extended community attributes.