Summit X450e-24p Switch Ports and Slots

The front panel of the Summit X450e-24p switch includes:

Twenty fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1–20) that provide high-density copper connectivity and a full 15.4 Watts of PoE per port.
Four combination ports (ports 21–24) using RJ45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity
For more information about combination ports, see Combination Ports and Failover.

For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.

Note
All 24 ports can provide PoE power.
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see Summit X450, X450a, and X450e Series Switch LEDs.
Stack number indicator showing the position of this switch in a stacked configuration
Serial console port used to connect a terminal and perform local management.

The rear panel of the Summit X450e-24p switch (Summit X450e-24p Switch Rear Panel) includes:

Slot for one of the Summit option cards listed in the following table. These port option cards allow you to add one or two high-speed uplink ports to the switch.

Table 1. Port Option Cards for Summit X450e Series Switches
Option Card Model	Type of Added Ports	For More Information
XGM2-2xn option card	10-gigabit XENPAK modules
XGM2-2xf option card	10-gigabit XFP modules
XGM2-2sf option card	10-gigabit SFP+ modules
XGM2-2bt option card	Fixed 10GBASE-T copper

Management port with associated LEDs
Two high-performance stacking ports with associated LEDs
Redundant power input connector for optional connection to one of the following external redundant power supplies with full PoE power support:
- EPS-LD External Power Supply Unit (Model 45019)
  See EPS-LD External Power Supply Unit for more information.
- EPS-500 External Power Supply (Model 10911).
  See EPS-500 External Power Supply Unit for more information.
  
  The connecting redundant power supply cable is shipped with the power supply.
AC power input socket
The internal power supply operates from 100 VAC to 240 VAC.