Installing an RPS-150XT in a Rack

To install the RPS-150XT in the three-slot modular shelf (STK-RPS-1005CH3), you must first install the shelf in a 19-inch rack.

Caution

Caution

Observe all ESD precautions when handling sensitive electronic equipment.
Caution

Caution

Before rack-mounting the device, ensure that the rack can support it without compromising stability. Otherwise, personal injury and/or equipment damage can result.

To install the RPS-150XT in a rack, follow these steps.

  1. Secure the front of the three-slot modular shelf (STK-RPS-1005CH3) to the rack by screwing four rack screws into the mounting ears on the right and left front of the shelf.
    See Securing the Three-slot Modular Shelf to a Rack.
    Click to expand in new window
    Securing the Three-slot Modular Shelf to a Rack
    Securing the three-slot shelf to a rack, by inserting screws through the flanges on both ends of the shelf into the left and rack posts
  2. Slide the power supply into an empty bay in the shelf.
    See Installing an RPS-150XT Power Supply Unit in a Shelf.
    Click to expand in new window
    Installing an RPS-150XT Power Supply Unit in a Shelf
  3. Tighten the captive screws to secure the power supply to the shelf.
  4. Connect the RPS-150XT to its power source.
    See Connecting the RPS Cable and AC Power Cord to an RPS-150XT.
121141-04 Rev. AB