The EPS-600LS External Power Module (Model 10913) is a 600-watt redundant power supply unit that can be used with the following Extreme Networks switches:
Install one, two, or three EPS-600LS power modules in the EPS-C chassis (Model 10912) to build an external redundant power system for the Summit switch. A redundant power cable shipped with the EPS-C chassis provides the connection between the external power system and the redundant power input connector on the back of the switch.
| Label | Color and State | Meaning |
|---|---|---|
| DC Good
(PSU1, PSU2, and PSU3) |
Green steady | Power supply is present and DC power is good. |
| Off | No power. | |
| AC Good
(PSU1, PSU2, and PSU3) |
Green steady | Power supply is present and AC power is good. |
| Off | No power. |
Note
An AC power input cord is not provided with the EPS-600LS power module. You can order an appropriate cord from Extreme Networks or from your local supplier. The power cord must meet the requirements listed in Power Cord Requirements for AC-Powered Switches and AC Power Supplies.Each EPS-C chassis is shipped with a special redundant power supply cord for connection to the Summit switch. Make sure that the EPS-C chassis is installed in the equipment rack before installing an EPS-600LS power module.