Summit X430-24p Switch Ports and Slots

The front panel of the Summit X430-24p switch includes:

• Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of high-density copper connectivity. In addition, all of these ports (ports 1-24) also support the POE protocol IEEE802.af and POE+ protocol IEEE 802.at standard. Using the POE protocol, the switch can provide 15.4 Watts of power on a single port up to a total power budget of 370 Watts. Using the POE+ protocol, the switch can provide 30 Watts of power on a single port up to a total power budget of 370 Watts.

• Four unpopulated 1000BASE-X SFP ports (ports 25–28) that provide 4 Gbps of fiber connectivity.

  

  Note

  All the twenty-four 10/100/1000BASE-T ports and all four of the 1000BASE-X SFP ports can be used simultaneously.

  For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.

• Ethernet management port.

• Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local management.

• LEDs to indicate port status and switch operating conditions.

  For a description of the LEDs and their operation, see Summit X430 Series Switch LEDs.

Summit X430-24p Switch Front Panel

Summit X430-24p Switch Rear Panel