The Summit X450 series includes the following switches:
|
Summit X450-24t switch Summit X450-24x switch |
Height: 1.73 inches (4.4 cm) Width: 17.35 inches (44.1 cm) Depth: 16.38 inches (41.6 cm) |
|
Summit X450-24t switch |
14 lb (6.35 kg) |
|
Summit X450-24x switch |
13.8 lb (6.26 kg) |
| Summit switch |
Auto-ranging 100 V to 240 VAC, 50/60 Hz |
|
Min voltage/associated current |
1.5 A at 100 V |
|
Max voltage/associated current |
1 A at 240 VAC |
|
Line frequency |
50 to 60 Hz |
|
Heat dissipation, Watts/BTU |
160 W/546 BTU/hr |
|
Power supply cord selection |
Refer to Power Cord Requirements for AC-Powered Switches and AC Power Supplies. |
|
North American Safety of ITE |
UL 60950-1:2003 1st Ed., Listed Device (US) CSA 22.2#60950-1-03 1st Ed.(Canada) Complies with FCC 21CFR 1040.10 (US Laser Safety) CDRH Letter of Approval (US FDA Approval) NOM/NYCE (Mexico) IEEE 802.3af 6-2003 Environment A for PoE Applications |
|
European Safety of ITE |
EN 60950-1:2001+A11 EN 60825-1+A2:2001 (Lasers Safety) TUV-R GS Mark by German Notified Body 73/23/EEC Low Voltage Directive |
|
International Safety of ITE |
CB Report & Certificate per IEC 60950-1:2001 Country Deviations AS/NZX 60950-1 (Australia /New Zealand) |
|
North America EMC for ITE |
FCC CFR 47 part 15 Class A (USA) ICES-003 Class A (Canada) |
|
European EMC standards |
EN 55022:1998 Class A EN 55024:1998 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 8, 11 EN 61000-3-2,3 (Harmonics & Flicker) ETSI EN 300 386:2001 (EMC Telecommunications) 89/336/EEC EMC Directive |
|
International EMC certifications |
CISPR 22:1997 Class A (International Emissions) CISPR 24:1997 Class A (International Immunity) IEC/EN 61000-4-2 Electrostatic Discharge, 8kV Contact, 15kV Air, Criteria A IEC/EN 61000-4-3 Radiated Immunity 10V/m, Criteria A IEC/EN 61000-4-4 Transient Burst, 1kV, Criteria A IEC/EN 61000-4-5 Surge, 2kV, 4kV, Criteria A IEC/EN 61000-4-6 Conducted Immunity, 0.15-80MHz, 10V/m unmod. RMS, Criteria A IEC/EN 61000-4-11 Power Dips & Interruptions, >30%, 25 periods, Criteria C |
|
Country-specific |
VCCI Class A (Japan Emissions) AS/NZS 3548 ACA (Australia Emissions) CNS 13438:1997 Class A (BSMI-Taiwan) MIC Mark, EMC Approval (South Korea) |
|
ETSI EN 300 386:2001 (EMC Telecommunications) ETSI EN 300 019 (Environmental for Telecommunications) |
|
Environmental standards |
EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational EN/ETSI 300 753 (1997-10) - Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G |
|
Operating conditions |
Temperature range 0 °C to 40 °C (32 °F to 104 °F) Humidity:10% to 95% relative humidity, non-condensing Shock (half sine): 30 m/s2 (3 G), 11ms, 18 shocks Random vibration: 3 to 500 Hz @ 1.5 G rms |
|
Storage & transportation conditions (packaged) |
Transportation temperature: –40° C to 70° C (–40° F to 158° F) Storage and transportation humidity: 10% to 95% relative humidity, non-condensing Packaged shock (half sine): 100 m/s2 (6 G), 6 ms, 600 shocks Packaged random vibration: 5 to 200 Hz @ 1.0 ASD (1m2/s2), w/–3 dB/octave 14 drops minimum on sides & corners @ 36 inches (<15 kg box) |
| Sound power in accordance with EN 300 753 (10-1997) |
Sound power: 61 dBA per ISO 7779 Declared sound power: 6.3 belsA per ISO 7779 & ISO 9296 |
|
Sound pressure in accordance with NEBS GR-63 Issue 2 |
Bystander sound pressure: 49 dBA rear @ 0.6m |