Removing an EPS-600LS power module enables a graceful power
transition from the external power supplies to the internal power supply.
To remove the power module, follow these steps:
-
Disconnect the AC power by removing the plug from
the wall.
-
Release the cable clip securing the AC power cord
to the EPS-600LS power module.
-
Disconnect the AC power cord from the EPS-600LS
power module.
-
On the EPS-600LS power module, loosen the captive
screws that secure it to the EPS-C chassis.
-
Slide the EPS-600LS power module out of the EPS-C
chassis.
