Tip
Extreme Redundant Power Supplies (RPS) do not support the ability for the RPS to be connected to an operational switch. Connecting an RPS to an operational switch can have an adverse effect on the switch. It is best practice that both the switch and the RPS be powered down prior to cabling them together. Once the cabling is completed, turn on the RPS, then turn on the switch.The VX-RPS-1000 provides load sharing, backup, or additive power for the V400 Virtual Port Extender.
| 1 = Captive screws | 3 = Connector to port extender |
| 2 = Status LEDs | 4 = AC power input connector |
| LED | LED Color | Status |
|---|---|---|
| AC OK | Green | AC input within operational range |
| Off | No AC voltage or AC voltage is outside the operational range | |
| DC OK | Green | DC input within operational range |
| Off | No DC voltage or DC voltage is outside the operational range |
For technical specifications, including pin locations and functions, see #GUID-E9E4F3AF-334B-4598-9567-A5E75E049651.