Installing a Single VX-RPS-1000 Power
Supply in a Rack
To install the VX-RPS-1000 power supply in a 19-inch rack, you need four
customer-supplied screws to attach the power supply to a standard 19-inch rack.
Caution
Observe all ESD precautions when handling
sensitive electronic equipment.
Caution
Before rack-mounting the device, ensure that the rack
can support it without compromising stability. Otherwise, personal injury and/or equipment
damage can result.
To install a single VX-RPS-1000 power supply in a rack, follow these steps.
Use screws (provided) to attach
a long bracket to one side of the power supply.
Use the holes closest to the rear of the power supply.
Attach the other bracket to the
other side of the power supply.
Long Brackets Attached
to VX-RPS-1000 Power Supply
Align the holes at the end of
each bracket with the rack post holes.
Secure the power supply to the
rack with rack-mounting screws.
Connect a power cable (included
with the power supply) to the output socket on the power supply and the RPS
input connector on the rear of the V400 unit.
Connect an AC power cord (not
included) to the AC power input socket on the power supply and to an AC power
outlet.
When power is connected,
verify that the power supply‘s DC OK LED turns green. Verify that the port
extender‘s PWR LED turns green.
