The EPS-LD power supply can be mounted in a rack or placed free-standing on a table.
You can position the EPS-LD facing either the front or the back of the rack. For this reason, each unit has two sets of mounting holes on each side. Extreme Networks recommends that you position the EPS-LD so that the power output connectors on the EPS-LD unit are on the same side as the external connector on the connecting switch.
Caution
Do not use the rack-mount brackets to suspend the EPS-LD from under a table or desk, or to attach the unit to a wall.
Note
An AC power cord is not provided with the EPS-LD power supply. See Power Cord Requirements for AC-Powered Switches and AC Power Supplies for information about selecting a power cord.