Connecting the EPS-LD to Power

An AC input power cord is not provided with the EPS-LD.

Make sure the EPS-LD is connected to the switch before you connect the AC power.

Caution

Caution

The EPS-LD does not have a switch for turning the unit on and off. You disconnect power to the EPS-LD by removing the plug from the electrical outlet. Make sure that this connection is easily accessible.

To connect the EPS-LD to power:

  1. Connect the AC input power cord to the AC connector on the EPS-LD.
  2. Connect the other end of the AC cord to the electrical outlet.
    1. Make sure the electrical outlet is properly grounded.

      The Power LED on the front of the EPS-LD lights solid green to indicate that it is ready.

121141-04 Rev. AB