Rack-mounting the EPS-T

Caution

Caution

Do not use the rack-mount brackets to suspend the EPS-T from under a table or desk, or to attach the EPS-T to a wall.

To rack-mount the EPS-T in a 19-inch rack:

  1. Place the EPS-T upright on a stable surface, with the front facing you.
  2. Remove the mounting bracket kit from the packaging.
  3. Attach the mounting brackets as shown in Attaching the Mounting Bracket:
    1. Place a mounting bracket over the mounting holes on one side of the EPS-T (see the figure below).
    2. Insert the screws and fully tighten them using a screwdriver.
      Click to expand in new window
      Attaching the Mounting Bracket
    3. Attach the mounting bracket for the other side of the EPS-T.
  4. Slide the EPS-T into the rack and secure it using appropriate rack-mount screws.
121141-04 Rev. AB