Summit X440-8t Switch Ports and Slots

The front panel of the Summit X440-8t switch includes:

Eight fixed autosensing 10/100/1000BASE-T ports (ports 1–8) that provide 8 Gbps of high-density copper connectivity
Four unpopulated SFP ports (ports 9–12) that provide 4 Gbps of fiber connectivity. The SFP ports support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Two high-performance stacking ports with associated LEDs
Ethernet management port.
Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local management.
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs.
Stack number indicator.

Note

If you are desktop mounting a Summit X440-8t switch, you must use the four rubber pads to maintain sufficient airflow around the unit See Installing Summit Switches in Desktop or Free-Standing Mode for installation instructions.

Note

If you are rack mounting Summit X440-8t switches, you must use special "keep out" rack mounting hardware. The rack mounting hardware is included with the unit. You must reserve 3 RU of space for the installation. See Installing a Summit X430-8p or X440-8t Switch in a Rack for installation instructions.

1 = Ethernet management port	4 = Stack number indicator
2 = 10/100/1000BASE-T ports	5 = Console port
3 = SFP ports	6 = Stacking Ports

The rear panel of the Summit X440-8t switch provides an AC power input socket. The internal AC power supply operates from 100 VAC to 240 VAC.

1 = AC power input connector