Use a protocol-based VLAN so that the VLAN only carries certain traffic types.
Procedure
-
In the navigation tree, expand
the following folders: .
-
Click VLANs.
-
In the Basic tab, click
Insert.
-
In the Id box, type the
unique VLAN ID or use the ID provided.
-
In the Name box, type
the VLAN name or use the name provided.
-
In the Color Identifier
box, select the color or use the color provided.
This color is used to visually distinguish the VLANs in a network.
-
In the MstpInstance box,
click the down arrow and choose an MSTI instance from the list.
-
In the Type box, select
byProtocolId.
This activates additional fields needed to configure protocol-based
VLANs.
-
To specify the VLAN port
membership, click the button (...) for one of
the following fields:
Port
Members
OR
StaticMembers
OR
NotAllowToJoin
-
Click each port button to choose
the desired membership color.
Yellow: Potential members—dynamic (potential members are treated as always
members)
OR
Green: Always members—static
OR
Red: Never members—not allowed to join
Important
In a protocol-based VLAN, a potential member becomes an active member of
the VLAN after a frame of the specified protocol is received.
-
Click Insert.
