Configure ExtremeCloud IQ Agent

You must first onboard the device. When zero touch connection establishes, IQ Agent is enabled, by default. Before IQ Agent is operational, you must first disable IQ Agent, configure the ExtremeCloud IQ IPv4 address or DNS name, and then reneable IQ Agent.

Before you begin

You must first onboard the device.

Procedure

  1. Enter Application Configuration mode:

    enable

    configure terminal

    application

  2. Disable IQ Agent:

    no iqagent enable

  3. Configure the ExtremeCloud IQ IPv4 address or DNS name:

    iqagent server address WORD<1-255>

  4. Enable IQ Agent:

    iqagent enable

Example

Configure IQ Agent:

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#application
Switch:1(config-app)#no iqagent enable
Switch:1(config-app)#iqagent server address hac.extremecloudiq.com
Switch:1(config-app)#iqagent enable

Display default IQ Agent configuration:

Switch:1>show application iqagent

================================================================================
                                 IQAgent Info
================================================================================
Agent Admin State       : true
Agent Version           : 0.4.3
Agent Oper State        : disconnected
Server Address          : hac.extremecloudiq.com
Server Address Origin   : None
Proxy Address           : 0.0.0.0
Proxy TCP Port          : 0
Proxy Username          :
9037347-00 Rev AD