View the Protocol Directory

View the protocol directory to see the list of protocols that RMON2 can monitor. You cannot change the list of protocols.

About this task

The protocol directory MIB is enabled by default for the predefined protocols.

Procedure

In the navigation pane, expand the Configuration > Serviceability > RMON folders.
Click Protocol Directory.
Click the Protocol Directories tab.

Protocol Directories Field Descriptions

The following table defines parameters for the Protocol Directories tab.


Name	Description
Index	Shows a unique identifier for the entry in the table.
Protocol	Shows the protocols RMON2 can monitor: Internet Protocol (IP) Secure Shell version 2 (SSHv2) Transmission Control Protocol (TCP) User Datagram Protocol (UDP) File Transfer Protocol (FTP) Hypertext Transfer Protocol (HTTP) Telnet Trivial File Transfer Protocol (TFTP) Simple Networking Management Protocol (SNMP) Note: RMON2 counts application packets received on any platform on which the application is not enabled or supported, before dropping them.
AddressMapConfig	Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following: notSupported supportedOff supportedOn If the value is supportedOn, the probe adds entries to the Address Map tab that maps the network layer address to the MAC layer address.
HostConfig	Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following: notSupported supportedOff supportedOn If the value is supportedOn, the probe adds entries to the Host Control tab to collect statistics for network layer and application layer hosts.
MatrixConfig	Describes and configures the probe support for the network layer and application layer host tables for this protocol. The value can be one of the following: notSupported supportedOff supportedOn
Owner	Shows the entity that configured this entry.