Displaying PoE Port Status

About this task

Perform the following procedure to display the PoE status for each port. You can use this information to view the status, classification, watts, and priority for each PoE port.

Procedure

Enter Privileged EXEC mode:

enable
View the port status:

show poe-port-status

Example

Switch:1#show poe-port-status 
========================================================================
                                POE Port Status
================================================================================
      ADMIN   CURRENT                        LIMIT            FAST PERPETUAL
PORT  STATUS  STATUS          CLASSIFICATION (Watts) PRIORITY POE        POE
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Port mgmt does not support DTE power
--------------------------------------------------------------------------------
1/1   Enable  DeliveringPower Class0         98      Low      Disable    Disable
1/2   Enable  DeliveringPower Class0         98      Low      Disable    Disable
1/3   Enable  DeliveringPower Class0         98      High     Disable    Disable
1/4   Enable  Searching       Class0         98      Low      Disable    Disable
1/5   Enable  Searching       Class0         98      Low      Disable    Disable
1/6   Enable  Searching       Class0         98      Low      Disable    Disable
1/7   Enable  Searching       Class0         98      Low      Disable    Disable
1/8   Enable  Searching       Class0         98      Low      Disable    Disable
1/9   Enable  Searching       Class0         98      Low      Disable    Disable
1/10  Enable  Searching       Class0         98      Low      Disable    Disable

Note

The PoE status of all ports is displayed. The preceding output is a sample of the full output.