Configure an ACE to Filter IPv6 Routed Packets

Configure an ACE to filter IPv6 routed packets only.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation pane, expand Configuration > Security > Data Path.
  2. Select Advanced Filters (ACE/ACLs).
  3. Select the Ipv6Routed tab.
  4. Select Insert.
  5. In the AclId field, type the appropriate ACL ID.
  6. In the AceId field, type the appropriate ACE ID.
  7. Select RoutedOnly.
  8. Select Insert.

Ipv6Routed Field Descriptions

The following table describes values on the Ipv6Routed tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

RoutedOnly

Specifies the match for IPv6 routed packets only.