Display MLD Interface Information
About this task
Use this procedure to display MLD snooping interface parameters.
Procedure
Examples
Switch:1#show ipv6 mld interface
==========================================================================================
Mld Interface - GlobalRouter
==========================================================================================
IF STATUS VERS OPER VERS QUERIER Wrong Query JOINS MODE
------------------------------------------------------------------------------------------
P6/3 inact 2 2 2001:0db8:3c4d:0015:0000:0000:1a2f:1aaa 0 0 pim
V666 inact 2 2 2001:0db8:3c4d:0015:0000:0000:1a2f:1bbb 0 0 pim
Switch:1#show ipv6 mld interface vlan 10
================================================================================
Vlan IPv6 Mld
================================================================================
VLAN QUERY QUERY ROBUST VERSION LAST SNOOP SSM DYNAMIC
ID INTVL MAX LIST ENABLE SNOOP DOWNGRADE
RESP QUERY ENABLE
--------------------------------------------------------------------------------
10 125 10 2 1 1 false false enabled
Switch(config)#show ipv6 mld interface gigabitethernet 1/11
================================================================================
Port IPv6 MLD
================================================================================
PORT QUERY QUERY ROBUST VERSION LAST DYNAMIC
NUM INTVL MAX LIST DOWNGRADE
RESP QUERY
--------------------------------------------------------------------------------
1/11 125 10 2 1 1 enabled
1 out of 1 entries displayed
Variable Definitions
The following table describes the variables for the show ipv6 mld interface command.
| Variable | Value |
|---|---|
|
vlan <1-4059> |
Displays MLD snooping information for the configured VLANs. |
|
gigabitEthernet {slot/port[/sub-port]} |
Displays MLD snooping information on a specific interface. |