Configuring DvR route redistribution

About this task

Configure redistribution of direct or static routes into the DvR domain, on the Global Router or for a specific VRF instance.

1. Enter either Global Configuration mode or VRF Router Configuration mode for a specific VRF context:

   enable

   configure terminal

   Optional: router vrf WORD<1-16>

2. Configure route redistribution of direct routes:
   1. Configure route redistribution of direct routes on a VRF. The route type is internal.

      dvr redistribute direct [metric <0-65535>]|[route-map WORD<1-64>]

   2. Enable route redistribution.

      dvr redistribute direct enable

   3. Apply the configuration:

      dvr apply redistribute direct

   4. Optional: Disable route redistribution of direct routes.

      no dvr redistribute direct

3. Configure route redistribution of static routes:
   1. Configure route redistribution of static routes on a VRF. The route type is external.

      dvr redistribute static [metric <0-65535>]|[route-map WORD<1-64>]

   2. Enable route redistribution.

      dvr redistribute static enable

   3. Apply the configuration.

      dvr apply redistribute static

   4. Optional: Disable route redistribution of static routes.

      no dvr redistribute static

4. Verify the route redistribution configuration. You can also verify it on a specific VRF instance.

   show dvr redistribute [vrf WORD<1-16>]

Example

Configure route redistribution of direct and static routes on the Global Router. Ensure that you apply the configuration.

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.

Switch:1(config)#dvr redistribute static
Switch:1(config)#dvr redistribute static metric 200
Switch:1(config)#dvr redistribute static enable
Switch:1(config)#dvr apply redistribute static

Switch:1(config)#dvr redistribute direct
Switch:1(config)#dvr redistribute direct metric 100
Switch:1(config)#dvr redistribute direct enable
Switch:1(config)#dvr apply redistribute direct

Verify configuration on the Global Router:

Switch:1(config)#show dvr redistribute 
===========================================================================
                    DVR Redistribute List - GlobalRouter 
===========================================================================

SOURCE MET MTYPE      ENABLE RPOLICY
---------------------------------------------------------------------------
STAT   200 External   TRUE  -
LOC    100 Internal   TRUE  -

Configure redistribution of direct and static routes on the specific VRF instance vrf1. Ensure that you apply the configuration.

Switch:1>enable
Switch:1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.

Switch:1(config)#router vrf vrf1
Switch:1(router-vrf)#dvr redistribute static
Switch:1(router-vrf)#dvr redistribute static metric 20000
Switch:1(router-vrf)#dvr redistribute static enable
Switch:1(router-vrf)#exit
Switch:1(config)#dvr apply redistribute static

Switch:1(router-vrf)#dvr redistribute direct
Switch:1(router-vrf)#dvr redistribute direct metric 10000
Switch:1(router-vrf)#dvr redistribute direct enable
Switch:1(router-vrf)#exit
Switch:1(config)#dvr apply redistribute static

Verify configuration on vrf1:

Switch:1(router-vrf)#show dvr redistribute vrf vrf1
============================================================================
                  DVR Redistribute List - VRF vrf1 
============================================================================

SOURCE MET MTYPE      ENABLE RPOLICY
----------------------------------------------------------------------------
STAT   20000 External   TRUE  -
LOC    10000 Internal   TRUE  -