Configuring SSH rekey data-limit

Use the following procedure to configure the limit for data transmission during the session.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enter the following command:

    ssh rekey data-limit <1–6>

Example

Switch:1>enable
Switch:1#configure terminal

Configure the SSH rekey data-limit to 2 GB:

Switch:1(config)#ssh rekey data-limit 2

Variable Definitions

The following table defines parameters for the ssh rekey data-limit command.

Variable

Value

<1–6>

Sets the SSH rekey data limit in GB, range is 1–6.
9037347-00 Rev AD