View the RMON2 Configuration State of Management Interfaces

About this task

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. View information about the RMON2 configuration state:

    show mgmt rmon

Example

Switch:1>show mgmt rmon
===============================================================================
Mgmt Rmon Information
===============================================================================
INST DESCR RMON-ADMIN-ENABLE RMON-OPER-ENABLE RMON-IP-ADDR
-----------------------------------------------------------------------------------------------------------------------
1 Mgmt-oob1 disable disable 0.0.0.0
3 Mgmt-clip enable enable 192.0.2.72
4 Mgmt-vlan enable enable 198.51.100.72