Displaying the MSDP mesh group information

Use the following procedure to display the configured mesh groups.

Procedure

Enter Privileged EXEC mode:

enable
Display the MSDP mesh group information:

show ip msdp mesh-group [vrf WORD<0-16>] [vrfids WORD<0-512>] [WORD<1-64>]

Example

Switch:#enable
Switch:1#show ip msdp mesh-group
==========================================================
                         MSDP Mesh Group - GlobalRouter
==========================================================
NAME            ADDRESS
----------------------------------------------------------
test            1.1.1.1
----------------------------------------------------------

Variable definitions

The following table defines parameters for the show ip msdp mesh-group command.


Variable	Value
vrf `WORD<0–16>`	Displays configuration information for a particular VRF.
vrfids `WORD<0–512>`	Displays configuration information for a particular VRF ID.
`WORD<1–64>`	Specifies the mesh group name.