Clear DvR Host Entries

About this task

Clear DvR host entries (IPv4 remote host routes) on a Controller. The host entries are learned on the switch either locally on its UNI port or dynamically from other nodes in the DvR domain.

Note

Note

You can clear DvR host entries only on a DvR Controller.

An error message displays if you attempt clearing of host entries on a DvR Leaf node.

Before you begin

Ensure that you enable DvR globally on the node.

Procedure

  1. In the navigation pane, expand the Configuration > Fabric folders.
  2. Click DVR.
  3. Click the Clear Host Entries tab.
  4. Update the fields as necessary, and then click Apply to save your configuration.

Clear Host Entries field descriptions

Use the data in the following table to use the Clear Host Entries tab.

Name

Description

ClearAll

Select to clear all DvR host entries.

ClearIpv4

Specifies the IPv4 address of the DvR host entries to clear.

The IPv4 address must not be the VLAN IP address on any Controller within the DvR domain.

ClearL2Isid

Specifies the Layer 2 VSN I-SID of the DvR host entries to clear.

The range is 0 to 16777215.

ClearL3Isid

Specifies the Layer 3 VSN I-SID of the DvR host entries to clear.

The range is 0 to 16777215.