View Layer 2 IP Ping Results

Use this procedure to view Layer 2 IP ping results.

Note

Note

After you trigger Layer 2 IP Ping, you must click the Refresh button to update the results.

Procedure

  1. In the navigation pane, expand Configuration > Serviceability > Diagnostics.
  2. Click L2Ping/L2Trace Route.
  3. Click the L2 IP Ping tab.
  4. To view the Layer 2 IP ping results, highlight an entry, and then click Result.

L2 IP Ping Result Field Descriptions

Use the data in the following table to use the L2 IP Ping Result tab.

Name

Description

IpAddrType

The address type of the destination IP Address.

IpAddr

Destination IP Address.

SendOrder

Specifies the order that sessions were sent. It is an index to distinguish among multiple L2Ping sessions. This value is assigned sequentially from 1. It correlates to the number of paths found.

VrfId

Specifies the VRF ID.

VlanId

Specifies the VLAN ID found from the Layer 3 lookup and used for transmission.

DestMacAddress

An indication of the target MAC Address transmitted.

PortNum

Either the value '0', or the port number of the port used for the l2 IP ping.

DestHostName

The host name of the responding node.

Size

The number of bytes of data sent.

PktsTx

Number of Packets transmitted for this VLAN/MAC.

PktsRx

Number of Packets received for this VLAN/MAC.

PercentLossWhole

Percentage of packet loss for this VLAN/MAC.

PercentLossFract

Percentage of packet loss for this VLAN/MAC.

MinRoundTrip

Minimum time for round-trip for this VLAN/MAC in us.

MaxRoundTrip

Maximum time for round-trip for this VLAN/MAC in us.

RttAvgWhole

Average time for round-trip for this VLAN/MAC in us.

RttAvgFract

Fractional portion of average time for round-trip.

Flag

Result flag indicating status or error code:

  • 1 - No error

  • 2 - Internal error

  • 3 - Invalid IP

  • 4 - L2Trace completed

  • 5 - Lookup failure for IP (no VLAN/MAC entries)