Installing a Summit X460 Switch in a Rack

Before you begin the installation, refer to Pre-installation Requirements.

The Summit X460 series switch fits into a standard 19-inch equipment rack.

The provided rack-mounting brackets attach to the back of the switch unit and are adaptable to a mid-mount installation.

To mid-mount the switch, set the flange toward the back of the switch as shown in Attaching a Rack-mounting Flange.
Click to expand in new window
Attaching a Rack-mounting Flange
The Summit X460 series switch is shipped without installed power supplies. You can install one or two power supplies. After the switch is secured to the rack, install the necessary power supplies for your configuration. For instructions, see the following topics:

To install an XGM3-2sf port card, see Installing a Summit XGM3 Series Port Option Card.

To install a stacking module, see Installing an Option Card in Slot B of a Summit X460 Series Switch.

121141-04 Rev. AB