RPS-150XT Redundant Power Supply

Tip

Tip

Extreme Redundant Power Supplies (RPS) do not support the ability for the RPS to be connected to an operational switch. Connecting an RPS to an operational switch can have an adverse effect on the switch. It is best practice that both the switch and the RPS be powered down prior to cabling them together. Once the cabling is completed, turn on the RPS, then turn on the switch.

The RPS-150XT provides backup power to Extreme Networks stackable switches. If for some reason the switch loses power from its internal power supply, the RPS-150XT can provide up to 150 W maximum operating power to support switch operation.

The power supply ships with the following:
The RPS-150XT is compatible with the following Extreme Networks switches:
The RPS-150XT is compatible with the following Extreme Networks switches:
The RPS-150XT is compatible with the following Extreme Networks switches:
Click to expand in new window
RPS-150XT Front Panel
1 = Captive screws 4 = Fan
2 = Status LEDs 5 = AC power input connector
3 = Handle
Click to expand in new window
RPS-150XT Rear Panel
1 = 14-pin Redundant Power Supply connector

See #GUID-7DF95981-A162-42C4-B7E6-23999DEE22A2 for pin locations and function.

Table 1. RPS-150XT LED Status Definitions
LED LED Color Status
AC OK Green AC input within operational range
Off No AC voltage or AC voltage is outside the operational range

For technical specifications, see #GUID-7DF95981-A162-42C4-B7E6-23999DEE22A2.

121141-04 Rev. AB