Remove an IPv6 Static Route

Use the no form of the ipv6 route command to remove a static route.

1. (Optional) View configured routes and confirm parameters,
   

   device# show ipv6 route
   IPv6 Routing Table for VRF "default-vrf"
   Total number of IPv6 routes: 11
   '*' denotes best ucast next-hop
   '[x/y]' denotes [preference/metric]
   
   1200:1201::/64, attached
       *via ::, Eth 2/45, [0/0], 45m29s, direct, tag 0
   1200:1201::1:1/128, attached
       *via ::, Eth 2/45, [0/0], 45m29s, local, tag 0
   1200:1202::/64, attached
       *via ::, Ve 2, [0/0], 45m26s, direct, tag 0
   1200:1202::1:1/128, attached
       *via ::, Ve 2, [0/0], 45m26s, local, tag 0
   2221::/32
       *via 1200:1201::1:2, Eth 2/45, [100/10], 11m41s, static, tag 300
   2222::/48
       *via fe80::205:33ff:fee6:a531, Eth 2/45, [1/1], 43m44s, static, tag 0
   2222::1/128
       *via fe80::205:33ff:fee6:a531, Eth 2/45, [110/1], 0m7s, ospfv3, intra, tag 0
   2223::/64
       *via 1200:1202::1:2, Ve 2, [1/1], 3m45s, static, tag 0
   2224::1/128
       *via fe80::205:33ff:fee6:a501, Ve 2, [1/1], 43m41s, static, tag 0
   fe80::/10, attached
       *via ::, , [0/0], 6h30m, local, tag 0
   ff00::/8, attached
       *via ::, Null0, [0/0], 6h30m, local, tag 0
   

2. (Optional) Narrow the output to static routes only.
   

   device# show ipv6 route static
   IPv6 Configured Static Routes for VRF "default-vrf"
   
   3002:7::/64-> 1200:3::1:2 preference: 1
      nh_vrf (default-vrf)
   
   3002:9::/64-> 1200:4::1:2 preference: 1
      nh_vrf (default-vrf)
   
   

3. Access global configuration mode.
   

   device# configure terminal
   

4. Remove the static route, including the destination and next hop.
   

   device(config)# no ipv6 route 2224::1/128 fe80::205:33ff:fee6:a501 ve 2 
   

   You do not need to include cost metric, distance, or tag parameters.