Various show commands can be used to display statistical and summary information about VRRP and VRRP-E configurations.
Before you begin
Before displaying VRRP information, VRRPv2 must be configured and enabled in your VRRP or VRRP-E network to generate traffic.
About this task
Use one or more of the following commands to display VRRPv2 information. The commands do not have to be entered in this order.
Procedure
-
Enter the
show vrrp command with a virtual-group ID to display detailed information about one virtual group ID.
device# show vrrp 1
Total number of VRRP session(s) : 1
VRID 1
Interface: Ve 10; Ifindex: 1207959562
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
Authentication type: No Authentication
State: Initialize
Session Master IP Address:
Virtual IP(s): 192.168.4.1
Configured Priority: unset (default: 100); Current Priority: 100
Advertisement interval: 1 sec (default: 1 sec)
Preempt mode: ENABLE (default: ENABLE)
Hold time: 0 sec (default: 0 sec)
Trackport:
Port(s) Priority Port Status
======= ======== ===========
Statistics:
Advertisements: Rx: 60, Tx: 6
Gratuitous ARP: Tx: 2
This example output shows that one IPv4 VRRP session is configured.
-
Enter the
show vrrp summary command.
device# show vrrp summary
Total number of VRRP session(s) : 1
Master session count : 1
Backup session count : 0
Init session count : 0
VRID Session Interface Admin Current State Short-path Revert SPF
State Priority Forwarding Priority Reverted
==== ======= ========= ===== ======== ====== ========== ======== ========
1 VRRP Ve 100 Enabled 110 Master
This example displays information about VRRP sessions.
-
Enter the
show vrrp interface command with interface ve 10 options and detailed output.
device# show vrrp int ve 10 detail
Total number of VRRP session(s) : 1
VRID 1
Interface: Ve 10; Ifindex: 1207959562
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
Authentication type: No Authentication
State: Initialize
Session Master IP Address:
Virtual IP(s): 192.168.4.1
Virtual MAC Address: 0000.5e00.0101
Configured Priority: 110 (default: 100); Current Priority: unset
Advertisement interval: 1 sec (default: 1 sec)
Preempt mode: ENABLE (default: ENABLE)
Hold time: 0 sec (default: 0 sec)
Master Down interval: 4 sec
Trackport:
Port(s) Priority Port Status
======= ======== ===========
Global Statistics:
==================
Checksum Error : 0
Version Error : 0
VRID Invalid : 0
Session Statistics:
===================
Advertisements : Rx: 60, Tx: 6
Gratuitous ARP : Tx: 2
Session becoming master : 0
Advts with wrong interval : 0
Prio Zero pkts : Rx: 0, Tx: 0
Invalid Pkts Rvcd : 0
Bad Virtual-IP Pkts : 0
Invalid Authenticaton type : 0
Invalid TTL Value : 0
Invalid Packet Length : 0
