Describes the process of configuring Resilient Hashing on the SLX devices.
Resilient Hashing is available for default VRF as well as user created VRFs. To configure Resilient Hashing on default VRF:
conf term
command.
SLX# conf term SLX(config)#
resilient-hash
command to configure.
SLX (config)# resilient-hash ? Possible completions: ecmp Resilient hash ECMP max-path Resilient hash max path (8|16|64) SLX (config)# resilient-hash ecmp ? Possible completions: enable Enable resilient hash ECMP SLX (config)# resilient-hash ecmp enable
max-path
value.
The default max-path
value is 8. You can choose to use 8, 16, or 64 paths.
SLX (config)# resilient-hash ? Possible completions: ecmp Resilient hash ECMP max-path Resilient hash max path (8|16|64) SLX (config)# resilient-hash max-path 8 SLX (config)#
show ip route system-summary
command.
SLX # show ip route system-summary System Route Count: 10 Max routes: 358400 (Route limit not exceeded) System Nexthop Count: 2 Max nexthops: 4000 (Nexthop limit not exceeded) One Path Nexthop Count: 1 Max One Path Nexthops: 48000 RH Flowset Entries: 2816 Max 32768 (Flowset limit not exceeded) VRF-Name: default-vrf Route count: 0 Max routes: Not Set (Route limit not exceeded) 0 connected, 0 static, 0 OSPF, 0 BGP, 0 ISIS, 0 unnumbered, 0 EVPN Host Resilient Hashing (Flowset Sz: 128, Max RH Paths: 8, RH Nexthops: 12) VRF-Name: mgmt-vrf Route count: 3 Max routes: Not Set (Route limit not exceeded) 1 connected, 1 static, 0 OSPF, 0 BGP, 0 ISIS, 0 unnumbered, 0 EVPN Host VRF-Name: vrf2 Route count: 7 Max routes: Not Set (Route limit not exceeded) 2 connected, 2 static, 0 OSPF, 1 BGP, 0 ISIS, 0 unnumbered, 0 EVPN Host Resilient Hashing (Flowset Sz: 128, Max RH Paths: 16, RH Nexthops: 10) VRF-Name: vrf3 Route count: 7 Max routes: Not Set (Route limit not exceeded) 2 connected, 2 static, 0 OSPF, 1 BGP, 0 ISIS, 0 unnumbered, 0 EVPN Host SLX #