You can configure a static route with a
tag that can be referenced in a route map.
Before you begin
Enable IPv6 on at least one interface by
configuring an IPv6 address or explicitly enabling IPv6 on that interface.
Procedure
-
Access global configuration
mode.
device# configure terminal
-
Enter the destination IP
address, next-hop address, the tag keyword, and a tag number.
device(config)# ipv6 route 2001:DB8::0/64 2001:DB8:0:ee44::1 tag 3
The tag "3" in this example can
be used in a route map.
